Fix toilet lick at base

Flush the toilet, and use a sponge to soak up any remaining water in the tank. Thank you for informing me. The most common causes:. This will allow a better seal. Cracks in the fabric of the toilet bowl can often cause it to leak around the base. Why Is My Toilet Leaking.

Call us at or complete the form below. Your site went into so much detail we figured it out. Shutoff valve Look behind the toilet to see if the water is coming from the shutoff valve. Yard Crashers 11am 10c. Locate and remove all old nuts, bolts, and washers from the toilet tank. Replacing a flapper is easy.

This would suck big time. But when we pulled the toilet, we had to scrape the old wax from a metal flange that looked very old — are all spacers plastic? Clear up any water from the floor with your least-favourite towel. I just wanted to let you, and others know about our product, The Culwell Flange. Tighten the nuts just enough to prevent the bowl from moving. Remove the excess water at the bottom of the tank with a sponge.

If the flapper is not the problem, then the leak is coming from the drain seat and the whole flush valve apparatus will have to be replaced. Check with your building department for the code requirement in your town. Knowledge Base Why Carrier? Enter your Zip, City or Postal code in the field below. If you do you run the risk of cracking the porcelain I've busted so many I've lost count, but they were the 4 bolt ones that hang on the wall Use a narrow putty knife to scrape off the old wax gasket from the bottom of the toilet and from the closet flange in the floor step 4. The valve may need to be tightened or replaced.